Multimeter gives you accurate digital readings for 7 functions: AC/DC voltage, DC current, resistance, transistor test, diode test, and battery test, all easily read on the large, easy-to-read LCD display. Positive set selector switch. 32" leads.
Automatic zero adjust
2.5x second sample time
Over-range indicator
Low-battery indicator
Fuse and diode-protected circuit
Price Availability
$12.50 In Stock
DC amps: 0-200 microns; A-2000 microns; A-20mA-200mA; Resistance: 0-200-2000-20K-200K-2000K ohm; DC voltage: 0-200mV-2000mV-20V-200V-1000V; AC voltage: 0-200-750V
Digital Speedometer System
Speed of the cart, Current, Average & Maximum
Temperature of the motor
Distance traveled
Ride Time
Price Availability
$221 to 271 In Stock
USB-RS232 Cable
for programming
Converts a standard 9-pin serial port to USB
Supports the RS 232 Serial interface
(standard 9-pin serial)
Single Cable USB to Serial communication
6 Ft. Length
Price Sale Price Availability
$24.95 $14.50 In Stock
Drivers and Manual on a CD
Windows® 95/98/98SE, 2000, ME, XP,Vista
Coil Suppression Contactor Diode
1 Amp with #10 ring terminals
Used with MZJ-200 & WR568 Contactors
Price: Availability:
$ 3.00 In Stock
Alltrax's PN KIT-CSR-1
Coil SuppressionContactor Diode
3 Amp Diode with #10 ring terminals
Used with MZJ-400 Contactors
Price Availability
$3.50 In Stock
Alltrax's PN KIT-CSR-3
Coil Suppression Contactor Diode
3 Amp with 1/4" spade terminals
Used with JCA-200 & JCA400 Contactors
Price Availability
$3.50 In Stock
Alltrax's PN KIT-CSR-3S
6 Amp Diode - Reverse Protection
6 amp Diode reverse protection diode
Replaces MR752 or 6A06
Price Availability
$2.50 In Stock
Pre-charge Resistor
220 Ohm 10 Watt Pre-charge resistor
5/16" ring terminals
Used on 24 to 36 volt carts
MZJ-200 & WR586 contactors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-220
Pre-charge Resistor
470 Ohm 10 Watt Pre-charge resistor
5/16" ring terminals
Used on 48 volt carts
MZJ-400 contactors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-470
Pre-charge Resistor
1000 Ohm 10 Watt Pre-charge resistor
5/16" ring terminals
Used on 72 volt carts
JCA-200 contactors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-1K
Pre-charge Resistor
220 Ohm 10 Watt Pre-charge resistor
3/8" ring terminals
Used on 36 volt carts
MZJ-400 contactors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-220T
Pre-charge Resistor
470 Ohm 10 Watt Pre-charge resistor
3/8" ring terminals
Used on 48 volt carts
MZJ-400 contactors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-470T
Pre-charge Resistor
1000 Ohm 10 Watt Pre-charge resistor
5/16" ring terminals
Used on 72 volt carts
JCA-400 contractors
Price Availability
$4.00 In Stock
Alltrax's PN KIT-PCR-1KT
CNN250 Fuse
250 Amp Battery Fuse
Use with
200 to 400 Amp
controllers
Part # CNN-250
250 Amp rating
Terminals 5/16" Slot terminals
Price Availability
$5.90 In Stock
CNN400 Fuse
400 Amp Battery Fuse
Use with
450 to 650 Amp
controllers
Part # CNN-400
400 Amp rating
5/16" Slot terminals
Price Availability
$9.85 In Stock
Battery Fuse Holder ANN ANL ANE CNE CNL
Main
battery fuse holder to protect the wiring
and batteries against short circuits
ANN Type Fuse Holder - will also hold ANN, CNN, CNE, ANL, & ANE.
Accepts fuses from 35amps to 800amps.
The base is made from solid high strength phenolic.
The 5/16" terminals are also epoxied into the base for extra strength
Block: 3-3/8" long, 1" wide & 2-1/4" high (including terminals.)
