• E-Z-GO
  • '94 and older Marathon with 0-5k throttle
  • '95 and newer Medalist & TXT with ITS
• Club Car
  • '96 and older with 0-5k throttle
  • '93 and newer with 5k-0 three wire
• Yamaha
  • G-8 with 0-5k throttle
  • '92 to'94 G-9 with 0-1k throttle
  • G-14 / G-16 with 0-1k throttle

AXE4822 AXE4834 AXE4844 300-400 Amps 24-48 Volts	AXE4845 AXE4855 AXE4865 400-600 Amps 24-48 Volts	AXE7234 AXE7245 300-450 Amps 48-72 Volts

The AXE product line is used with SERIES Wound Motors. These units drive golf cars, scissors lifts, boom trucks, Neighborhood electric vehicles, and a variety of other applications.

E-Z-Go DCS	E-Z-Go PDS	Club Car PD Plus	Club Car IQ	Yamaha G-19
Standard No Adaptor	PDS Adaptor $20	PD-Plus Adaptor $35	IQ Adaptor $35	G-19 Adaptor $37

The DCX product line is used with separately excited Wound Motors, commonly called SHUNT wound motors. These units drive golf cars, people movers, scissors lifts, boom trucks, Neighborhood electric vehicles and a variety of other applications. This controller will provide 15-20% more torque to the stock vehicle.  One of the nice features of this controller is the potting that is done to keep the water out.  You can get this controller wet over and over again with no worries about shorting.

NPX4834 300 Amps	NPX4834EZ 300 Apmps	NPX4844 300 Amps	NPX48EZ 300 Amps

The NPX is a non-programmable version of the AXE without the ability to change any of the preset within the software.

NCX4834 E-Z-Go DCS	NCX4834 E-Z-Go PDS

The NCX is a non-programmable version of the DCX without the ability to change any of the preset within the software.