Features include:
- Alltrax DCX 300 DCS
- E-Z-Go DCS Regen Cart
- 300 Amps
- With 9-pin connector
- 24-48 Voltage Range
- ITS Throttle
- Fairplay Regen Cart
- Fairplay Legacy ZX 4.0
- Legacy ZX 4.0
- Legacy LX ZX 5.5
- 300 Amps
- With 9-pin connector
- 24-48 Voltage Range
- 0-5k Throttle
Manufacturer's website Alltrax Inc
- Programmable via RS232 com port using PC or Laptop
- Integrated anodized heat-sink with multi bolt pattern for flexibility
- Fully encapsulated epoxy fill - environmentally rugged design
- Advanced MOSFET power transistor design for excellent efficiency
and power transfer
- 1/2 Speed reverse option
- Battery Input Voltage: 24 – 48VDC Nominal, (max 60VDC)
- Under-voltage cutback: adjustable, 16-30 VDC, Pre set at 12VDC under battery pack voltage
- Over-voltage shutdown: adjustable, 30-60 VDC (60VDC MAX), Pre set at 60VDC
- Field Current Limit: 30A (Programmed for Motor Field Excitation Curve)
- Operating Frequency: 18kHz
- Contactor (Solenoid) drive current: 2A max
- Control voltage range 12 – 60 VDC @ 15mA max:
- Key Switch Input
- Throttle Inputs
- Reverse Mode Inputs
- Reverse Horn Output: 50mA sinking max (Active Low = Horn ON)
- Standby Current (Power Up): < 35mA
- Throttle Type E-Z-GO ITS
- Operating Temperature: -25C to 75C, 95C shutdown
- Adjustable via Controller Pro software:
- Throttle acceleration / deceleration ramp rate
- Throttle map (curve) profile: Linear, Progressive, S-Curve
- MAX (Armature) current limit (0-100%)
- Brake current limit (0-100%)
- Under / Over voltage shutdown
- Top Speed & Turbo button
- Half Speed Reverse
- High Pedal Disable
- TURBO (used only at FULL Throttle)
- Adapter Circuits: See Product Page - Golf Car Adapter
- Ratings
| DCX Models |
300 |
400 |
500 |
600 |
| Current Limit |
300A |
400A |
500A |
600A |
| 2 Min. Rating |
300A |
400A |
500A |
600A |
| 5 Min Rating |
150A |
210A |
300A |
350A |
| 60 Min. Rating |
135A |
160A |
250A |
250A |
The DCX 300 & 400 replaces a Curtis 1204 short heat sink at 6.5" in length (165.1mm) Drawing.pdf
The DCX 500 & 600 replaces a Curtis 1205 long heat sink at 8.5 " in length (215.9mm) Drawing.pdf
Warranty:
Warranties are listed on the Policy Page
