Home > Controllers > By Manufacturer > Alltrax > XCT Shunt Wound Motor Controllers >

Alltrax XCT-48300 1264 Replacement Motor Controller

Alternative Views:

Our Price: $413.00

Availability:: In Stock
Product Code: CON-XCT48300-1264

Alltrax XCT-48300 1264 Replacement Motor Controller

This is Alltrax's newest line of regen (shunt wound) separately excited motor controllers.

This 1264 replacement uses an Alltrax XCT48300 G19 controller, and includes an adapter harness plug to be used as a 1264 replacement.

We recommend you contact us before ordering this product since it is so new and there are many variables for programming.We will need to know the model number of your original controller, the model number of your motor and the year and brand of vehicle it is being used on.

  • XCT48300 1264
  • 300 Amps
  • 48 Volts
  • Many Programmable Throttle Options
  • Auto Throttle Calibration
  • USB Programming With Free Software

  • DC motor controller for separately excited motors (not series)
  • ABS + PC510 flame resistant thermal plastic enclosure
  • All copper heat sinks
  • Sealed epoxy UL-94-VO / 5VA flame rating (best in industry)
  • Adjustable undervoltage cutback 16-30 VDC
  • Adjustable overvoltage shutdown 30-60 VDC
  • Operating Frequency: 18k Hz
  • Voltage drop @ 100amps: <.18V
  • Control voltage KSI keyswitch and reverse: 36-48V Nom, 62 VDC Max
  • Powered Up Standby Current <.02A (20mA)
  • Relay solenoid drive output current: 5amp peak, 1.0A Continuous
  • Power lead bolt thread size = 5/16ths
  • Fuse
  • Operators Manual
  • 5/16ths Power Lead Bolts
  • Cooling fan & housing (increased performance)
  • Programming cable
Documents & Wiring Diagrams


2 Mins

5 Mins


XCT48300 300 200 125
XCT48400 400 250 140
XCT48500 500 400 250

Pre-charge Resistor 470 Ohm with 5/16" Ring Terminals Coil Suppression Diode 3 Amp with Ring Terminals Alltrax Adapter Mount Adapter For Yamaha G19/G22/G29 & YDRE Drive MZJ-200 Main Solenoid, 200 Amp, 24V, 36V & 48V
Our Price: $8.00

Our Price: $5.00

Our Price: $38.00

Our Price: $42.00

Programming Cable for the Alltrax SPM, SPB, XCT & SRX Controllers A to B USB Alltrax Fan & Cover For XCT & SRX Motor Controllers
Our Price: $10.50

Our Price: $47.00


Share your knowledge of this product. Be the first to write a review »