This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer.
- Output Power of 10 KW Continuous, 24 KW Peak (at 72 volts)
- Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.
- This is a 4 pole motor (8 magnets).
- The Phase to Phase winding resistance is 0.065 Ohms with 12 turns per phase.
- The maximum recommended rotor speed is 5000 RPM.
- Voltages from 0 to 72 VDC input to the control.
- Torque constant of 0.12 Nm per Amp
- The Inductance Phase to Phase is 0.05 Milli-Henry.
- Armature Inertia is 45 Kg Cm Squared.
- Continuous current of 125 Amps AC (180 Amps DC into the motor control).
- Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
- Weight of 35 pounds.
- Peak Stall Torque of 60 ft lb.
- This is an Open Frame, Fan Cooled motor.
- Timed for counter-clockwise rotation (can be changed to clockwise)
