|
|
|
|
|
|
Throttle Linkage Ball (PB-6)
|
|
|
This ball can be attached to some throttles like the PB-6 as a throttle linkage.
|
|
|
|
|
|
|
|
|
|
Microswitch Replacement For Curtis PB-6 0-5K Ohm Throttle
|
|
|
This is a replacement microswitch for the PB-6 throttle. Universal applications.
|
|
|
|
|
|
|
|
|
|
3 TERMINAL MICRO SWITCH FOR EZGO 1971-1981
|
|
|
Three Terminal Micro Switch for E-Z-GO Electric 1971-1981.
|
|
|
|
|
|
|
|
|
|
Magura Twist Grip Throttle 0-5K Ohm
|
|
|
The Magura Twist Throttle has a 0-5k ohm output for Electric Scooter / Bicycle.
- Three wire output.
- Comes with matching grip for opposite side
- 7/8" handlebars
- 68" long control cable
- Weight: 0.5 lbs
- Blue Wire = Throttle High
- Brown Wire = Wiper
- Black Wire = Throttle Low
|
|
|
|
|
|
|
|
|
|
ITS Style E-Z-Go Inductive Throttle Sensor
|
|
|
- ITS Style
- For E-Z-GO Electric 1994 and Newer
- Replaces OEM # EZGO 25854-G01
- Weight: 1.0 lb.
|
|
|
|
|
|
|
|
|
|
Curtis Style PB-6 0-5K Ohm Throttle
|
|
|
The Curtis Style PB-6 is an input device between the Throttle pedal and the speed controller.
- Stainless case with a micro switch built in
- The potbox is the throttle in an EV
- The potbox tells the controller how much input needed by the controller
- The potbox's lever arm is attached to the existing accelerator cable.
- Height: 3.75", Width: 4", Depth: 1.875"
- Weight: 10 oz
- Resistance: 0-5K ohms
|
|
|
|
|
|
|
|
|
|
Domino Twist Grip Throttle - 0-5K Ohm - IP67 Rated (Dust & Waterproof)
|
|
|
Domino Twist Throttle - 0-5K - IP67 Sealed
- Five wire output
- Matching grip for opposite side
- Mating plug and seals included
|
|
|
|
|
|
|
|
|
|
E-Z-Go Inductive Throttle Sensor ITS
|
|
|
- For E-Z-GO Electric 1994 and Newer
- Replaces OEM # EZGO 25854-G01
- Weight: 1.0 lb.
|
|
|
|
|
|
|
|
|
|
POTENTIOMETER THROTTLE WITH MICRO SWITCH FOR EZGO MARATHON ELECTRIC 1990-1994
|
|
|
This is the potentiometer with micro switch for E-Z-GO Marathon electric from 1990-1994.
|
|
|
|
|
|
|
|
|
|
Curtis FP-6 Style Throttle - 0-5K Ohm
|
|
|
The Curtis FP-6 is ideal for tough environments. Designed for maximum
installation flexibility and durability. These pedals are made of
rugged aluminum castings.
- 0-5k ohm or 5k-0 ohm sealed 3-wire throttle
- Two 2-wire microswitches
- 3 ft + long, 7-wire unshielded cable
- Adjustable spring-return on pedal, ~1.75" travel
- Metal shaft with aluminum housing and rubber gaskets
- Foot surface is ribbed aluminum with natural finish
|
|
|
|
|
|
|
|
|
|
Curtis FP-6 Style Throttle - 0-5 Volt
|
|
|
Ideal for tough environments such as material handling. Curtis style foot
pedals are used with Curtis electronic motor speed controllers, as well
as models by other manufacturers. Designed for maximum installation
flexibility and durability. These pedals are made of rugged aluminum
castings.
- 0-5V sealed 3-wire throttle
- Two 2-wire microswitches
- 3 ft + long, 7-wire unshielded cable
- Adjustable spring-return on pedal, ~1.75" travel
- Metal shaft with aluminum housing and rubber gaskets
- Foot surface is ribbed aluminum with natural finish
Red (1) - 5V Input
Black (2) - Ground
Brown (3) - 0-5V Output
Blue (4) & Yellow with Green (5) - Footswitch
|
|
|
|
|
|
|
|
|
|
MCOR3 Club Car Electric 2009 and Later (Conversion From MCOR2)
|
|
|
- MCOR 3 for accelerator pedal (throttle) 2nd gen.
- Conversion from MCOR2
- Club Car electric 2009 & Up
- For Carts With Serial Prefix: PD, PH, PJ, PK,PP, PQ, PU, PV, PW
|
|
|
|
|
|
|
|
|
|
MCOR4 Club Car Electric 2009 and Later (Conversion From MCOR2)
|
|
|
- MCOR 4 for accelerator pedal (throttle) 2nd gen.
- Conversion from MCOR2
- Club Car electric 2009 & Up
- For Carts With Serial Prefix: PD, PH, PJ, PK,PP, PQ, PU, PV, PW
|
|
|
|
|
|
|
|
|
|
MCOR 2 Throttle Sensor for Club Car Precedent Golf Carts
|
|
|
- MCOR Motor Controller Input
- Club Car Precedent
|
|
|
|
|
|
|
|
|
|
MCOR4 Conversion Kit - Club Car 2001-04 - (Conversion From MCOR1)
|
|
|
- MCOR 4 conversion from MCOR 1
- Club Car electric 2001 - 2004
- For DS cars
|
|
|
|
|
|
|
|
|
|
Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k
|
Our Price: $240.00 Sale Price: $209.00 Savings: $31.00
|
|
|
- Drive Arrangement: Single Axis
- Basic Assembly: 3.25" shaft Length and Boot
- Handel: 1.25" Diameter round ball
- Handel Action: Spring Return
- Output: Proportional, Discrete
- Output Devices: 0-5K Ohms
|
|
|
|
|
|
|
|
|
|
CURTIS FP-2 FOOT PEDAL W/ SWITCH
|
|
|
- 5 k ohm 3-terminal pot with microswitch
- Cable: 6 foot long, 5-wire unshielded, #22 AWG
- Stroke: Spring-returned pedal, 1.75" travel
- Metal Parts: Satin finish black paint on steel
- Foot Surface: Non-slip rubberized surface
- Dimensions: 9.0" L X 4.0" W X 3.75" D
|
|
|
|
Home
