Home > E-Z-Go > Motors > Regen / Shunt Motors >

D&D 170-501-0001 Golf Cart Motor, E-Z-GO & Yamaha G19 & G22 (Sepex), High Speed
D&D 170-501-0001 Golf Cart Motor, E-Z-GO & Yamaha G19 & G22 (Sepex), High Speed


 
Our Price: $425.00

Availability:: In Stock
Product Code: MOT-170-501-0001
Qty:

Description
 

Features include:

  • Yamaha G19 / G22
  • Can run on a E-Z-Go DCS / PDS when used with an Alltrax DCX400 controller.
  • High Speed Motor
  • Stock replacement motor, not intended for lifted carts.
  • Shunt Motor with Regen 48 VDC
  • Approximate Speed 18*
  • 20-30% increase in torque
  • 13.5 HP Peak
  • 4160 RPM motor
  • Replaces XP-2141
  • 19 Tooth Female Spline (works with the Dana H12 Axle)
  • Length 9.75 inches long
  • Actual Weight 48 lbs
  • Shipping Weight 50 lbs
EZ-Go DCS & PDS @ 48 VDC
170-501-0001A
Recommended Alltrax Controller Approx Speed MPH Approx % Change in Torque
Speed with Stock Tires DCX400 18 20
Speed with Stock Tires DCX500 18 30

Yamaha G19-G22, GMAX @ 48 VDC
170-501-0001A

Alltrax Model Approx Speed MPH Approx % Change in Torque
Speed with Stock Tires DCX400 18 20
Speed with Stock Tires DCX500 18 30

Vehicle performance specifications are compared to the standard factory performance. Several factors can effect the performance. Some are battery conditions; tire size, tread type and air pressure and varying environmental conditions. Standard factory speeds normally run between 12 - 14 MPH.

It’s recommended that you upgrade wiring throughout the golf cart to a minimum of 4 AWG and a contactor that is rated for 400 amp continuous.

Alltrax has come out with a new set of field maps for the DCX Controllers to maximize the performance of these motors. If you wish to use your current controller it needs to be updated to this new field map or it could cause failure to both the motor & controller. You are welcome to send your controller to us to be programmed for a fee of $15 to pay for shipping the controller back to you.

* (Reference: D&D Motors Specification)


Best Practice Before Buying:
remove your existing motor and determine if it is Regen or Series type, that the shaft spline is 10 tooth or 19, and that your controller is compatible with the new motor.

Share your knowledge of this product. Be the first to write a review »