Skip to content
Toggle mobile menu
Monday to Friday 7am to 2pm PST
FAQ & Documents
Golf Cart Parts
EV Conversion Parts
Cables / Wires & Lugs
Contactors / Solenoids
Converters DC to DC
F & R switches
Kits & Packages
Meters & Gauges
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Permanent Magnet Motors
Motenergy ME1012 Brushless DC Permanent Magnet Motor
This three-phase motor requires a motor controller (Sevcon Gen4 or Kelly controllers) that we currently do not offer.
Output Power of 10 KW Continuous, 24 KW Peak (at 72 volts)
Designed for long life. No brush maintenance. The motor is 92% efficient at voltages between 24 to 72 VDC. Continuous current of 125 amps AC (180 Amps DC into the motor control). This is a 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap and 3 Hall sensors at 120 degrees electrical timing. It has two stators with a rotor in the center.
This is a 4 pole motor (8 magnets).
The Phase to Phase winding resistance is 0.065 Ohms with 12 turns per phase.
The maximum recommended rotor speed is 5000 RPM.
Voltages from 0 to 72 VDC input to the control.
Torque constant of 0.12 Nm per Amp
The Inductance Phase to Phase is 0.05 Milli-Henry.
Armature Inertia is 45 Kg Cm Squared.
Continuous current of 125 Amps AC (180 Amps DC into the motor control).
Peak current of 420 Amps AC for 1 minute (600 Amps DC into the motor control).
Weight of 35 pounds.
Peak Stall Torque of 60 ft lb.
This is an Open Frame, Fan Cooled motor.
Timed for counter-clockwise rotation (can be changed to clockwise)
5 Pin Connector Kit for Hall Sensor Motenergy Motors
2 Pin Temperature Sensor Connector Kit for Motenergy Motors
Motenergy ME-1306 Brushless DC Permanent Magnet Motor
8 Pin Connector Kit for Sine/Cosine Sensor Motenergy Motors
Motenergy ME0201014201 Brushless DC Permanent Magnet Motor
Motenergy ME-0909 Brush-Type Permanent Magnet DC Motor
Motenergy ME-0201012801 Brushless DC Permanent Magnet Motor
Motenergy ME-1115 Brushless DC Permanent Magnet Motor - 96V
Motenergy ME-1305 Brushless DC Permanent Magnet Motor
Replacement Brush Holder with Brushes for ME1003, ME1004, ME1007 & ME1008 Motors
Share your knowledge of this product.
Be the first to write a review »