Curtis FP-6 Style Throttle - 0-5K Ohm

$125.00
No reviews yet Write a Review
SKU:
THR-FP6-0-5K

Ideal for tough environments such as material handling. Curtis style foot pedals are used with Curtis electronic motor speed controllers, as well as models by other manufacturers. Designed for maximum installation flexibility and durability. These pedals are made of rugged aluminum castings.

  • 0-5k ohm or 5k-0 ohm sealed 3-wire throttle
  • One microswitches
  • 3 ft + long, 7-wire unshielded cable
  • Adjustable spring-return on pedal, ~1.75" travel
  • Metal shaft with aluminum housing and rubber gaskets
  • Foot surface is ribbed aluminum with natural finish

Gen-1 Wiring:

For a 0-5K Ohm setup, use the Brown (1) & Black (2) wires for the throttle and Blue (4) and Yellow (5) for the foot switch.

Red / Gray (3) is the high side of the pot
Brown (1) is the wiper
Black (2) is the lowside of the pot
For 5K-0 2 wire, use Red / Gray (3) and Brown (1)

Gen-2 Wiring:

For a 0-5K Ohm setup, use the Brown & Black wires for the throttle and Blue and Green/Yellow for the foot switch.

Gray - is the high side of the pot
Brown - is the wiper
Black -  is the lowside of the pot
For 5K-0 2 wire, use Gray and Brown