Merritt Joystick PRO-4 Single-Axis Throttle Control 0-5k

$225.00
No reviews yet Write a Review
SKU:
THR-PRO4

JR Merritt Joystick Pro4 Single-axis Throttle Control 0-5k

  • Configuration: Joystick with knob handle.
  • Spring return to center (off) position. 
  • Detent at neutral/center position.
  • Microswitches for driving forward and reverse contactor coils are automatically activated away from center position.
  • Connections: 4 ea. pot connections have screw-terminals, 6 ea. micro switch connections have 3/16" fast-on blades.
  • Microswitches: 2 ea. SPDT rated at 11 amps, 120VAC
  • Stroke: 36 degrees either side of center position
  • Mounting: Panel-mountable with 3 holes. Center hole is 1.50" diameter.
  • Materials: Molded plastic and rubber parts, diecast frame, printed circuit board. Dimensions: Actuator stick protrudes 3.6" above panel. Knob is 1.25" diameter. Base of unit is 3.1" H by 2.00" W by 3.4" L


Wiring Details:

W & T are used for a 0-5K, 2 wire


PRO-4 Mechanical data
Life 20 million cycles
Materials Cast Aluminum body, plated steel side plates, self lubricating bearings, stainless steel return arms and compression style return spring system.
Operating temperature range -25 to +70 degrees C
Handle travel +/- 36 degrees for potentiometer
Potentionmeter rotation +/- 126 degrees
Gasketing To IP55
Maximum number of contacts (4) micro switches with
Maximum number of steps 3-0-3 with microswitches
5-0-5 with NSO contacts
Panel space requirement 1.73" x 3.38" (Footprint of Joystick Mounting)
Mounting dimensions See PRO-4 literature PDF
PRO-4 Electrical data
Microswitch contact rating 11A @ 125 VAC
Terminal .187 x .020 male Q.C.
VNSO contact rating 16A @ 240 VAC
Terminal Saddle clamps
Maximum wire size 18 AWG for microswitch
14 AWG for contact block
Potentiometer 10k 4-wire 0.5W, conductive plastic, 5 million cycles
5k 3-wire 0.5W, conductive plastic, 5 million cycles