Part Number This is the replacement for the 622/11082 model used on the Ford Think cars.
622/11086 Four Pin Model
The 4-pin connector is an added option (not included).
7.5(L w/ base) x 2.98(W) x 1.70(H) inches-
5.6(L) x 2.87(W) x 1.69(H) inches
190(L) x 75.8(W) x 43.3(H) mm
Input Voltage nominal:
72/80V (57.6V min. – 100V Max.)
The converter will deliver a load current of:
12 Volts @ 300 Watts, 24 Amps
Light load 13.5 Volts
Can be used to charge a battery
Operating Temperature -25C to +55C
The Sevcon DC/DC Converters are suitable for all
electric powered vehicles and are designed to be fitted on-board
the vehicle and connected permanently to the battery.
These converters deliver a stable isolated high power, low
voltage DC supply for such accessories as lights, horns, and
wipers. This eliminates inefficient battery taps and fragile,
expensive high voltage accessories.
Additional Features & Benefits
Custom, Compact Design
Custom designed for use with motor
controllers, these compact, yet powerful converters can be
connected in parallel for higher power requirements to
perform reliably in industrial and commercial
Safer than direct battery connection, these
converters provide an electrically isolated output for
Output is regulated to 13.5V and is maintained
regardless of input voltage variations throughout the
Encapsulated to achieve a protection rating to
IP67, these converters can be used with complete
confidence in the most punishing environments.